This REGULAR-DUTY, 22AWG, 6.5-ft (2m) long power extension cable can handle up to 2A of current and is great for adding additional length to your existing power cables. This cable has a 5.5mm x 2.1mm barrel socket at one end of the cable and a 5.5mm x 2.1mm barrel plug at the other end of the cable. This cable works with the 5.5mm x 2.1mm barrel connectors on our battery eliminator kits and accessories such as our power extension cables, power splitter cables, AC to DC wall power adapters and our active dummy cell batteries.

This OUTDOOR RATED (IP66), REGULAR-DUTY, 22AWG, 6.5-ft (2m) long DC power extension cable can handle up to 2A of current and is great for adding additional length to your existing outdoor DC power cables. This outdoor cable has an M12-1.75, 5.5mm x 2.1mm barrel socket at one end of the cable and an M12-1.75, 5.5mm x 2.1mm barrel plug at the other end of the cable. A weatherproof seal is created by the M12-1.75 screw connectors at the ends of the cable which keeps out water and dirt creating reliable connections. This weatherproof seal is created by compression of the rubber O-ring on the male connector when the connectors are firmly screwed together (refer to illustrations). This outdoor cable works with other M12-1.75, 5.5mm x 2.1mm barrel connectors on our outdoor rated battery eliminator kits and outdoor accessories such as our outdoor power extension cables, outdoor power splitter cables, outdoor active dummy cell batteries, and our outdoor solar panels & modules.

This OUTDOOR RATED (IP66), REGULAR-DUTY, 22AWG, 6.5-ft (2m) long DC power cable can handle up to 2A of current. This outdoor cable has an M12-1.75, 5.5mm x 2.1mm male barrel plug at one end of the cable, and the other end of the cable has a pair of 2mm bare conductors (see illustrations) that are tinned and ready to be soldered to the appropriate points in an electronic circuit. This outdoor power cable is intended for the do-it-yourselfer with the equipment and skills necessary to solder the stripped and tinned bare ends of the cable to the appropriate points in an electronic circuit. The most common application of this outdoor cable is to replace an existing power cable on a solar panel since most solar panels on the market do not have outdoor rated (IP66) power cables. Most solar panels on the market have simple “push-to-connect” type 5.5mm x 2.1mm male barrel plugs which allow water and dirt to penetrate which eventually leads to an unreliable connection due to corrosion and degradation of the electrical connection between barrel connectors. The M12-1.75, 5.5mm x 2.1mm male barrel plug at one end of this outdoor rated cable creates a weatherproof seal when the M12-1.75 screw connector is mated with an appropriate M12-1.75, 5.5mm x 2.1mm female barrel socket. A weatherproof seal is created by compression of the rubber O-ring on the M12-1.75, 5.5mm x 2.1mm male barrel plug when mated with the appropriate M12-1.75, 5.5mm x 2.1mm female barrel socket (refer to illustrations) such as those found on our outdoor rated battery eliminator kits and outdoor accessories such as our outdoor power extension cables, outdoor power splitter cables, and outdoor active dummy cell batteries. This outdoor power cable can also serve as a replacement of the power cables found on our outdoor solar panels and modules.

This HEAVY-DUTY, 20AWG, 6.5-ft (2m) long power extension cable can handle up to 3A of current and is great for adding additional length to your existing power cables. Its HEAVY-DUTY construction has a large wire gauge (20AWG) helping to reduce the voltage drop across the cable meaning more power gets delivered to your electronic device. This cable has a 5.5mm x 2.1mm barrel socket at one end of the cable and a 5.5mm x 2.1mm barrel plug at the other end of the cable. This cable works with the 5.5mm x 2.1mm barrel connectors on our battery eliminator kits and accessories such as our power extension cables, power splitter cables, AC to DC wall power adapters and our active dummy cell batteries.

This SUPER HEAVY-DUTY, 18AWG, 6.5-ft (2m) long power extension cable can handle up to 4A of Current and is great for adding additional length to your existing power cables. Its SUPER HEAVY-DUTY construction has a large wire gauge (18AWG) helping to reduce the voltage drop across the cable meaning more power gets delivered to your electronic device. This cable has a 5.5mm x 2.1mm barrel socket at one end of the cable and a 5.5mm x 2.1mm barrel plug at the other end of the cable. This cable works with the 5.5mm x 2.1mm barrel connectors on our battery eliminator kits and accessories such as our power extension cables, power splitter cables, AC to DC wall power adapters and our active dummy cell batteries.

This LIGHT-DUTY, 24AWG, 6-ft (1.83m) long power extension cable can handle up to 1A of current and is great for adding additional length to existing power cables that are used for charging or powering electronic devices from +5VDC USB wall power adapters or other +5VDC USB power sources. This cable has a regular USB Type-A plug at one end and a 5.5mm x 2.1mm male barrel plug at the other end. Perfect for adapting existing +5VDC USB power output ports to our 3-cell battery eliminator kits (AAA, AA, C and D cell). The 5.5mm x 2.1mm male barrel plug at one end of the cable works with the barrel connector sockets on our 3-cell battery eliminator kits and other battery eliminator kit accessories such as our power extension cables and power splitter cables. This cable only supports power and does not support USB data transmission.

This 3-way HEAVY-DUTY 6'9" long power splitter & extension cable allows you to power up to 3 x LED flameless LED candles or other electronic devices from a single AC to DC wall power adapter. The length of each branch of the cable is 6'2" long and a 2-position ON/OFF rocker switch is built into the common branch of the cable allowing you to turn “On” and “Off” the electronic devices with the flip of a switch! The cable's HEAVY-DUTY construction uses large gauge wire to reduce the voltage drops across the cable meaning more power gets delivered to your electronic devices. This power splitter cable has a single 5.5mm x 2.1mm barrel plug at the common end of the cable and a 5.5mm x 2.1mm barrel socket at the other end of each branch of the cable. This power splitter cable works with the barrel connectors on our battery eliminator kits and accessories such as our power extension and power splitter cables, AC to DC wall power adapters and our active dummy cell batteries.