This AA Active Dummy Cell Battery is used to replace a real AA battery in flameless LED candles and other electronic devices that use one or more AA batteries. It has an 8" long, 22AWG, 2-conductor red & black ZIP wire that has 0.125-inches of insulation stripped off the ends, and the ends are tinned and ready to be soldered or attached by other means to a power source. This AA Active Dummy Cell Battery does not have a connector at the end of the wire, so it is intended for the do-it-yourselfer who will be connecting it to a power supply such as a wall power adapter or some other type of DC power source.

This Thin Flat Flexible Cable (FFC) has 2 x 24AWG conductors and is 5.08mm wide, 7.5” long and only 0.22mm thick. One end of the cable has a 2.1mm ID x 5.5mm OD over-mold in-line female barrel socket DC power connector, and the other end has 4mm of bare conductors that are tinned and ready to be soldered to a connector of your choice or directly to the appropriate points in an electronic circuit. Since this cable is extremely thin and flexible, it can be run around battery compartment covers, through narrow cracks and around tight corners, and it can also be run under items allowing them to sit flat without tilting or wobbling. The cable polarity is indicated with a white mark on the insulation of the FFC cable. This white mark indicates the conductor that is attached to the center conducting pin on the 2.1mm x 5.5mm female barrel socket connector. The female barrel socket connector is made of a black PVC insulating material, and the FFC cable is made of black polyester insulating material.

This White Thin Flat Flexible Cable (FFC) has 2 x 24AWG conductors and is 5.08mm wide, 7.5” long and only 0.22mm thick. One end of the cable has a 2.1mm ID x 5.5mm OD over-mold in-line female barrel socket DC power connector, and the other end has 4mm of bare conductors that are tinned and ready to be soldered to a connector of your choice or directly to the appropriate points in an electronic circuit. Since this cable is extremely thin and flexible, it can be run around battery compartment covers, through narrow cracks and around tight corners, and it can also be run under items allowing them to sit flat without tilting or wobbling. The cable polarity is indicated with a faint red stripe on the insulation of the FFC cable. This faint red stripe indicates the conductor that is attached to the center conducting pin on the 2.1mm x 5.5mm female barrel socket connector. The female barrel socket connector is made of a white PVC insulating material, and the FFC cable is made of a white polyester insulating material.