This OTDOOR RATED (IP66) AA Active Dummy Cell Battery has an IP66 rated 5.5mm x 2.1mm female barrel socket with M12-1.75 screw threads and is used to replace a real AA battery in outdoor products that use one or more AA batteries. It has an 11" long thin flat flexible cable (FFC cable) with an IP66 rated 5.5mm x 2.1mm female barrel socket with M12-1.75 screw threads at the end. This barrel socket will work with the IP66 rated 5.5mm x 2.1mm male barrel plugs with M12-1.75 screw threads on our Outdoor Battery Eliminator Kits and Accessories (Outdoor Power Splitter Cables, Outdoor Power Extension Cables and Rechargeable Solar Panels). This Outdoor AA Active Dummy Cell Battery will work by itself or in conjunction with our AA Passive Dummy Cell Batteries and the appropriate power source such as our Rechargeable Solar Panels or an AC to DC Wall Power Adapter to eliminate expensive batteries that are constantly having to be replaced. Please read the detailed discussion and diagram for the components that make up a complete Outdoor Battery Eliminator solution. Stop changing out dead batteries and start saving money with our Outdoor Battery Eliminator Kits & Accessories.

This OUTDOOR RATED (IP66) C Active Dummy Cell Battery is used to replace a real C battery in outdoor products that use one or more C batteries. It has an 11" long thin flat flexible cable (FFC cable) with an IP66 rated 5.5mm x 2.1mm female barrel socket with M12-1.75 screw threads at the end. This barrel socket will work with the IP66 rated 5.5mm x 2.1mm male barrel plugs with M12-1.75 screw threads on our Outdoor Battery Eliminator Kits and Accessories (Outdoor Power Splitter Cables, Outdoor Power Extension Cables and Rechargeable Solar Panels). A weatherproof seal is created by compression of the rubber o-ring on the mating connector (male plug) when the connectors are firmly screwed together (refer to illustrations). The connector on this cable will mate with regular (non-weatherproof) 5.5mm x 2.1mm DC barrel connectors (male plugs), but the connection will not be weatherproof (water and dirt). This Outdoor C Active Dummy Cell Battery will work by itself or in conjunction with our C Passive Dummy Cell Batteries and the appropriate power source such as our Rechargeable Solar Panels or an AC to DC Wall Power Adapter to eliminate expensive batteries that are constantly having to be replaced. Please read the detailed discussion and diagram for the components that make up a complete Outdoor Battery Eliminator solution. Stop changing out dead batteries and start saving money with our Outdoor Battery Eliminator Kits & Accessories.

This OUTDOOR RATED (IP66) D Active Dummy Cell Battery is used to replace a real D battery in outdoor products that use one or more D batteries. It has an 11" long thin flat flexible cable (FFC cable) with an IP66 rated 5.5mm x 2.1mm female barrel socket with M12-1.75 screw threads at the end. This barrel socket will work with the IP66 rated 5.5mm x 2.1mm male barrel plugs with M12-1.75 screw threads on our Outdoor Battery Eliminator Kits and Accessories (Outdoor Power Splitter Cables, Outdoor Power Extension Cables and Rechargeable Solar Panels). A weatherproof seal is created by compression of the rubber o-ring on the mating connector (male plug) when the connectors are firmly screwed together (refer to illustrations). The connector on this cable will mate with regular (non-weatherproof) 5.5mm x 2.1mm DC barrel connectors (male plugs), but the connection will not be weatherproof (water and dirt). This Outdoor D Active Dummy Cell Battery will work by itself or in conjunction with our D Passive Dummy Cell Batteries and the appropriate power source such as our Rechargeable Solar Panels or an AC to DC Wall Power Adapter to eliminate expensive batteries that are constantly having to be replaced. Please read the detailed discussion and diagram for the components that make up a complete Outdoor Battery Eliminator solution. Stop changing out dead batteries and start saving money with our Outdoor Battery Eliminator Kits & Accessories.

This AAA Passive Cell Battery is used to replace a real AAA battery in flameless LED candles and other electronic devices that uses one or more AAA batteries. Works in conjunction with a AAA Active Dummy Cell Battery and the appropriate AC to DC Wall Power Adapter to eliminate expensive batteries that are constantly having to be replaced. Please read the detailed discussion and diagram for the components that make up a complete Battery Eliminator solution. Stop changing out dead batteries and start saving money with our battery eliminator kits & accessories.

This AA Passive Cell Battery is used to replace a real AA battery in flameless LED candles and other electronic devices that uses one or more AA batteries. Works in conjunction with a AA Active Dummy Cell Battery and the appropriate AC to DC Wall Power Adapter to eliminate expensive batteries that are constantly having to be replaced. Please read the detailed discussion and diagram for the components that make up a complete Battery Eliminator solution. Stop changing out dead batteries and start saving money with our battery eliminator kits & accessories.

This C Passive Cell Battery is used to replace a real C battery in flameless LED candles and other electronic devices that use two or more C batteries. Works in conjunction with a C Active Dummy Cell Battery and the appropriate AC to DC Wall Power Adapter to eliminate expensive batteries that are constantly having to be replaced. Please read the detailed discussion and diagram for the components that make up a complete Battery Eliminator solution. Stop changing out dead batteries and start saving money with our battery eliminator kits & accessories.

NO LONGER RECOMMENDED. REPLACED WITH NEXT-GENERATION PART: D-PASSIVE-DUMMY-NG. This D Passive Cell Battery is used to replace a real D battery in flameless LED candles and other electronic devices that use two or more D batteries. Works in conjunction with a D Active Dummy Cell Battery and the appropriate AC to DC Wall Power Adapter to eliminate expensive batteries that are constantly having to be replaced. Please read the detailed discussion and diagram for the components that make up a complete Battery Eliminator solution. Stop changing out dead batteries and start saving money with our battery eliminator kits & accessories.

NEW & IMPROVED SINGLE COMPONENT DESIGN! This new and improved next generation D Passive Dummy Cell Battery eliminates the need for the 2-component solution used in the original first-generation D Passive Dummy Cell Battery resulting in a higher reliability solution. The original first-generation version is constructed of a AA Passive Dummy Cell Battery that slides into a hollow plastic D cell battery dummy case. Since this new and improved next generation design is a single component, you don’t have to worry about the AA Passive Dummy Cell Battery falling out of the hollow plastic D cell battery dummy case. It also means not having to worry about the positive (+) terminal of the AA Passive Dummy Cell Battery making good contact with the internal positive (+) terminal of the hollow plastic D cell battery dummy case.

This OUTDOOR RATED (IP66), REGULAR-DUTY, 22AWG, 3.3-ft (1m) long DC power extension cable can handle up to 2A of current and is great for adding additional length to your existing outdoor DC power cables. This outdoor cable has an M12-1.75, 5.5mm x 2.1mm barrel socket at one end of the cable and an M12-1.75, 5.5mm x 2.1mm barrel plug at the other end of the cable. A weatherproof seal is created by the M12-1.75 screw connectors at the ends of the cable which keeps out water and dirt creating reliable connections. This weatherproof seal is created by compression of the rubber O-ring on the male connector when the connectors are firmly screwed together (refer to illustrations). This outdoor cable works with other M12-1.75, 5.5mm x 2.1mm barrel connectors on our outdoor rated battery eliminator kits and outdoor accessories such as our outdoor power extension cables, outdoor power splitter cables, outdoor active dummy cell batteries, and our outdoor solar panels & modules.

This OUTDOOR RATED (IP66), REGULAR-DUTY, 22AWG, 6.5-ft (2m) long DC power extension cable can handle up to 2A of current and is great for adding additional length to your existing outdoor DC power cables. This outdoor cable has an M12-1.75, 5.5mm x 2.1mm barrel socket at one end of the cable and an M12-1.75, 5.5mm x 2.1mm barrel plug at the other end of the cable. A weatherproof seal is created by the M12-1.75 screw connectors at the ends of the cable which keeps out water and dirt creating reliable connections. This weatherproof seal is created by compression of the rubber O-ring on the male connector when the connectors are firmly screwed together (refer to illustrations). This outdoor cable works with other M12-1.75, 5.5mm x 2.1mm barrel connectors on our outdoor rated battery eliminator kits and outdoor accessories such as our outdoor power extension cables, outdoor power splitter cables, outdoor active dummy cell batteries, and our outdoor solar panels & modules.

This OUTDOOR RATED (IP66), REGULAR-DUTY, 22AWG, 6.5-ft (2m) long DC power cable can handle up to 2A of current. This outdoor cable has an M12-1.75, 5.5mm x 2.1mm male barrel plug at one end of the cable, and the other end of the cable has a pair of 2mm bare conductors (see illustrations) that are tinned and ready to be soldered to the appropriate points in an electronic circuit. This outdoor power cable is intended for the do-it-yourselfer with the equipment and skills necessary to solder the stripped and tinned bare ends of the cable to the appropriate points in an electronic circuit. The most common application of this outdoor cable is to replace an existing power cable on a solar panel since most solar panels on the market do not have outdoor rated (IP66) power cables. Most solar panels on the market have simple “push-to-connect” type 5.5mm x 2.1mm male barrel plugs which allow water and dirt to penetrate which eventually leads to an unreliable connection due to corrosion and degradation of the electrical connection between barrel connectors. The M12-1.75, 5.5mm x 2.1mm male barrel plug at one end of this outdoor rated cable creates a weatherproof seal when the M12-1.75 screw connector is mated with an appropriate M12-1.75, 5.5mm x 2.1mm female barrel socket. A weatherproof seal is created by compression of the rubber O-ring on the M12-1.75, 5.5mm x 2.1mm male barrel plug when mated with the appropriate M12-1.75, 5.5mm x 2.1mm female barrel socket (refer to illustrations) such as those found on our outdoor rated battery eliminator kits and outdoor accessories such as our outdoor power extension cables, outdoor power splitter cables, and outdoor active dummy cell batteries. This outdoor power cable can also serve as a replacement of the power cables found on our outdoor solar panels and modules.

This OUTDOOR RATED (IP66), REGULAR-DUTY, 22AWG, 10-ft (3m) long DC power extension cable can handle up to 2A of current and is great for adding additional length to your existing outdoor DC power cables. This outdoor cable has an M12-1.75, 5.5mm x 2.1mm barrel socket at one end of the cable and an M12-1.75, 5.5mm x 2.1mm barrel plug at the other end of the cable. A weatherproof seal is created by the M12-1.75 screw connectors at the ends of the cable which keeps out water and dirt creating reliable connections. This weatherproof seal is created by compression of the rubber O-ring on the male connector when the connectors are firmly screwed together (refer to illustrations). This outdoor cable works with other M12-1.75, 5.5mm x 2.1mm barrel connectors on our outdoor rated battery eliminator kits and outdoor accessories such as our outdoor power extension cables, outdoor power splitter cables, outdoor active dummy cell batteries, and our outdoor solar panels & modules.

This OUTDOOR RATED (IP66) 12-in (30cm) long power splitter cable allows you to power multiple outdoor electronic devices from a DC power source such as one of our rechargeable solar panels or an AC/DC wall power adapter. This outdoor power splitter cable has a single M12-1.75, 5.5mm x 2.1mm female barrel socket at the end of the common cable and M12-1.75, 5.5mm x 2.1mm male barrel plugs at the split ends of the cable. Weatherproof seals are created by the M12-1.75 screw connectors which keep out water and dirt creating reliable connections. These weatherproof seals are created by compression of the rubber o-rings on the male connectors when they are firmly screwed together with the mating female connectors (refer to illustrations). This outdoor power splitter cable works with the M12-1.75, 5.5mm x 2.1mm barrel connectors on our outdoor battery eliminator kits and outdoor accessories such as our outdoor power extension cables, outdoor active dummy cell batteries, and our rechargeable solar panels. The outdoor rated connectors on this cable will mate with regular (non-weatherproof) 5.5mm x 2.1mm DC barrel connectors, but the connections will not be weatherproof (water and dirt).

This rechargeable lithium-ion battery has a standard 18650 form factor and a large 3,000mAh capacity and is perfect for use in applications that have high power demands such as rechargeable solar panels, trail cameras, security cameras, portable medical devices, radio-controlled devices, etc. The 18650 rechargeable lithium-ion battery is one of many different types of rechargeable batteries on the market. The 18650 is a type of rechargeable lithium-ion battery, and the "18650" refers to the battery's dimensions which are 18mm in diameter by 65mm in length. The 18650 is used in a large variety of electronic devices including laptop computers, flashlights, power banks, electric vehicles, rechargeable solar panels and many other types of high-power applications. Lithium-Ion batteries are known for their high energy densities, high rates of discharge, light weight, long service life, long shelf life, and low self-discharge rates.

This 8.1" long, black ground stake is made of an ABS plastic and has 1/4"-20 male screw threads made of an aluminum alloy material. Designed for use in lawns, loose soil & dirt, sand, and even gravel and works great with our extension poles & rods to increase the distance a mounted device is located above the ground. Great for locating a solar panel or other device such as a security camera or trail camera in your yard, in the woods or on the beach! With the addition of our extension poles & rods, you can locate your device higher up from the ground to avoid slashing water & mud and to raise it above obstructions such as grass, plants, rocks, roots, etc. Simply push the ground stake into the ground and screw your device or extension poles directly into the 1/4"-20 male screw thread on the top of the stake. Since this ground stake is mode of a tough ABS plastic, and the screw threads are made of an aluminum alloy material, it’s naturally weatherproof and resists rust & corrosion. The diameter of the head is 1.675” which helps to stabilize the mounted device or extension pole.

This 6” long, 0.355” diameter black extension rod has 1/4"-20 male screw threads on the top and 1/4"-20 female screw threads on the bottom for attachment to our ground stakes & spikes to increase the distance a device is located above the ground. Great for getting a solar panel or other device such as a camera away from splashing water & mud and to raise it above obstructions such as grass, plants, rocks, roots, etc. More than one extension rod can be screwed together to extend the height even further! This extension rod is weather resistant and made of a lightweight, black painted aluminum alloy material and measures 0.355” in diameter by 6” in length.

This 6” long, high-quality, 0.355” diameter black anodized aluminum alloy extension rod has 1/4"-20 male screw threads on the top and 1/4"-20 female screw threads on the bottom for attachment to our ground stakes & spikes to increase the distance a device is located above the ground. Great for getting a solar panel or other device such as a camera away from splashing water & mud and to raise it above obstructions such as grass, plants, rocks, roots, etc. More than one extension rod can be screwed together to extend the height even further! This extension rod is not like other painted extension rods and is made of high-quality 6061 aluminum alloy and is anodized black, so it won’t peel or chip. The 6061 aluminum alloy is hardened for toughness and is sand blasted prior to anodization for a super smooth and consistent finish. Weather, corrosion & rust resistant.

This 8.25” long, 0.395” diameter black extension rod has 1/4"-20 male screw threads on the top and 1/4"-20 female screw threads on the bottom for attachment to our ground stakes & spikes to increase the distance a device is located above the ground. Great for getting a solar panel or other device such as a camera away from splashing water & mud and to raise it above obstructions such as grass, plants, rocks, roots, etc. More than one extension rod can be screwed together to extend the height even further! This extension rod is weather resistant and made of a lightweight, black painted aluminum alloy material and measures 0.395” in diameter by 8.25” in length.

This 6-1/8” long, high-quality, 0.750” diameter black anodized aluminum alloy extension pole has 1/4"-20 male screw threads on the top and 1/4"-20 female screw threads on the bottom for attachment to our ground stakes & spikes to increase the distance a device is located above the ground. Large diameter provides more rigidity for heavier devices. Great for getting a solar panel or other device such as a camera away from splashing water & mud and to raise it above obstructions such as grass, plants, rocks, roots, etc. More than one extension pole can be screwed together to extend the height even further! This extension pole is not like other painted extension pole and is made of high-quality 6061 aluminum alloy and is anodized black, so it won’t peel or chip. The 6061 aluminum alloy is hardened for toughness and is sand blasted prior to anodization for a super smooth and consistent finish. Weather, corrosion & rust resistant.

This swivel head mount has 1/4"-20 male screw threads on the top swivel assembly for attachment to our solar panels that have 1/4"-20 female screw thread sockets on the back. The swivel head mount can then be attached to our tree mounts, ground stakes and extension poles which have 1/4"-20 male screw threads for attachment to the bottom of this swivel head mount which has a 1/4"-20 female screw thread socket. The swivel head ball can be adjusted in both azimuth and elevation. The azimuth angle can be rotated a full 360°, and the elevation angle can be adjusted up to 45° and a full 90° when the stem on the swivel head ball is positioned in the notch in the housing. These versatile adjustment options allow for positioning of the solar panel to better align with the direction of the sun. See the illustrations for more details about these positioning options and application examples. Once the position of the solar panel is determined, the adjustment knob can be firmly tightened to hold the solar panel in place. The raised textured plastic finish on the top of the round jam nut helps to prevent the solar panel from inadvertently rotating, and the round jam nut can also be firmly tightened up against the back of the solar panel to further prevent inadvertent rotation. The housing of the swivel head is made of a black anodized aluminum alloy, and the swivel ball, stem and screw threads are made of a chrome plated steel to help prevent rust & corrosion. The swivel head mount has a diameter of 1.12” (28.4mm), and its overall height is 2.06” (52.4mm). This swivel head mount can also be used with tripods, digital cameras, cell phones, camcorders, trail cameras, security cameras, camera flashes, and many other types of devices that have standard 1/4"-20 tripod screw threads.

This tree mount has 1/4"-20 male screw threads on the top rotating arm for attachment to our solar panels that have 1/4"-20 female screw thread sockets on the back. The tapered threads on the bottom rotating arm are self-tapping for easy installation onto a tree or wooden post. The elevation angle of the top rotating arm can be moved up or down to optimize exposure of the solar panel to sunlight. Once the optimum angle has been determined, the wing nut at the rotating arm joint can be tightened to prevent the solar panel from moving from the desired position. The tree mount also has a wing jam nut that can be tightened up against the back of the solar panel to prevent it from rotating. The components of this tree mount are made of a painted black steel/iron alloy to help prevent rust & corrosion. This tree mount can also be used with digital cameras, cell phones, camcorders, trail cameras, security cameras, camera flashes, and many other types of devices that have standard 1/4"-20 tripod screw threads. See the illustrations for more details and application examples. The overall length of the tree mount is 6.25” long, and the tapered self-tapping screw threads are 1.25” long.

This tree mount bracket with swivel head mount is great for mounting solar panels and other devices such as trail cameras to trees and wooden posts. The swivel head mount screws onto the tree mount bracket via standard 1/4”-20 tripod screw threads, and the top of the swivel head mount has standard 1/4”-20 male tripod screw threads for mounting solar panels, trails cameras and many other types of devices that have standard 1/4”-20 female tripod screw threads. The swivel head mount is adjustable for versatile positioning of solar panels and trail cameras. The tree mount bracket has self-tapping tapered wood screw threads for mounting to trees or wooden posts. Both the tree mount bracket and swivel head mount are made of weather and rust-resistant materials.

This wall & post mount has 1/4"-20 male screw threads on the top of a swivel ball for attachment to our solar panels that have 1/4"-20 female screw thread sockets on the back. The flange on the base of this wall & post mount can be attached to a flat surface such as a wall or post using the screws included in the mounting kit. The swivel ball assembly can be adjusted in both azimuth and elevation. The azimuth angle can be rotated a full 360°, and the elevation angle can be adjusted up to 45° and a full 90° when the stem on the swivel ball is positioned in the notch in the retaining stem. These versatile adjustment options allow for positioning of a solar panel to better align with the direction of the sun. See the illustrations for more details about these positioning options and application examples. Once the position of the solar panel is determined, the adjustment collar can be firmly tightened to hold the solar panel in place. The round base jam nut can then be firmly tightened up against the back of the solar panel to prevent the solar panel from inadvertently rotating. The flange mount, base, retaining stem and adjustment collar are made of a black painted aluminum alloy, and the round base jam nut is made of a black plastic ABS material. The swivel ball is also made of an aluminum alloy material to prevent rust & corrosion. The flange mount has a diameter of 2.25” (5.72cm), and the overall height of the wall & post mount is 4” (10.16cm). This versatile wall & post mount can also be used with trail cameras, security cameras, motion sensors, and many other types of devices that have standard 1/4"-20 tripod mount female screw threads.

This clever little adapter snaps onto the back of virtually any Blink™ camera allowing it to be mounted to any mounting device or bracket with standard 1/4"-20 male screw threads. This opens up a broad array of mounting options for your Blink™ cameras allowing you to use anything with a standard 1/4"-20 male tripod screw thread. The adapter is made of a black ABS plastic material with brass screw threads protecting it against rust and corrosion. The adapter has a diameter of 1.20” (3.048cm), and its overall thickness is 0.35” (0.889cm). Works with the following Blink™ cameras: Blink™ Outdoor Camera (4th Gen), Blink™ Outdoor Camera (3rd Gen), Blink™ Outdoor, Blink™ XT2/XT, and Blink™ Mini.

This 7.125” long x 0.228” diameter ground stake is made of a lightweight, hardened 7001 aluminum alloy material and is perfect for securing low-voltage outdoor cables to the ground. Helps to keep your cables secure and close to the ground to avoid tripping or having them sucked up by the lawnmower! The ground stake has a “question mark” shape with a pointed tip to help penetrate the ground. The curved hook top holds cables securely in place and makes it easier to locate and pull out of the ground either by hand or with the aid of the claw of a hammer. The stake has a hexagonal shape to increase the ground contact area which helps to prevent movement and rotation. The stake is strong enough to be lightly hammered into harder ground, but care should be taken to avoid bending it. The aluminum alloy material is weather, corrosion & rust resistant.

Great for protecting the connectors on our indoor power extension and indoor power splitter cables from water, chemicals and dirt allowing them to be used outdoors! This small piece of black dual-wall heat shrink tubing is 1-inch long and has a 0.5-inch non-recovered diameter and 1/8-Inch recovered diameter. The tubing has an adhesive lined inner wall that activates once heated and creates a tough water, dirt, and chemical resistant bond after recovering from being heated. The tubing has a large 4:1 heat-shrink ratio allowing for a snug fit over rough and uneven surfaces. This piece of heat-shrink tubing is the perfect length and diameter to fit over our indoor 5.5mm x 2.1mm barrel connectors to create a water, chemical and dirt resistant barrier. It will also work with connections between an indoor 5.5mm x 2.1mm barrel connector and an outdoor (IP66 rated) 5.5mm x 2.1mm barrel connector with M12-1.75 threads. This tubing can also be used for other types of connectors such as adapters used to convert from 5.5mm x 2.1mm barrel connectors to USB and other types of miniature connectors. The tubing can be shrunk using a heat gun, a hair dryer and even an open flame from a lighter or a match. Made of flame-retardant materials.

Duct Seal Compound is an oil-based putty-type material that is used to waterproof and seal electrical connections and around holes and openings where wires and cables pass through, and it helps keep air and moisture out to protect circuitry and other items that might be damaged by exposure to water, dirt, chemicals, etc. The compound is made of non-drying polymers, oils, and inert fillers. The compound is a grey, soft, non-toxic, putty-type compound that adheres to clean dry surfaces such as plastic and metal. It’s easy to use and can be hand-applied at temperatures ranging from 25°F to 120°F.