This 8.1" long, black ground stake is made of an ABS plastic and has 1/4"-20 male screw threads made of an aluminum alloy material. Designed for use in lawns, loose soil & dirt, sand, and even gravel and works great with our extension poles & rods to increase the distance a mounted device is located above the ground. Great for locating a solar panel or other device such as a security camera or trail camera in your yard, in the woods or on the beach! With the addition of our extension poles & rods, you can locate your device higher up from the ground to avoid slashing water & mud and to raise it above obstructions such as grass, plants, rocks, roots, etc. Simply push the ground stake into the ground and screw your device or extension poles directly into the 1/4"-20 male screw thread on the top of the stake. Since this ground stake is mode of a tough ABS plastic, and the screw threads are made of an aluminum alloy material, it’s naturally weatherproof and resists rust & corrosion. The diameter of the head is 1.675” which helps to stabilize the mounted device or extension pole.

This 6” long, 0.355” diameter black extension rod has 1/4"-20 male screw threads on the top and 1/4"-20 female screw threads on the bottom for attachment to our ground stakes & spikes to increase the distance a device is located above the ground. Great for getting a solar panel or other device such as a camera away from splashing water & mud and to raise it above obstructions such as grass, plants, rocks, roots, etc. More than one extension rod can be screwed together to extend the height even further! This extension rod is weather resistant and made of a lightweight, black painted aluminum alloy material and measures 0.355” in diameter by 6” in length.

This 6” long, high-quality, 0.355” diameter black anodized aluminum alloy extension rod has 1/4"-20 male screw threads on the top and 1/4"-20 female screw threads on the bottom for attachment to our ground stakes & spikes to increase the distance a device is located above the ground. Great for getting a solar panel or other device such as a camera away from splashing water & mud and to raise it above obstructions such as grass, plants, rocks, roots, etc. More than one extension rod can be screwed together to extend the height even further! This extension rod is not like other painted extension rods and is made of high-quality 6061 aluminum alloy and is anodized black, so it won’t peel or chip. The 6061 aluminum alloy is hardened for toughness and is sand blasted prior to anodization for a super smooth and consistent finish. Weather, corrosion & rust resistant.

This 8.25” long, 0.395” diameter black extension rod has 1/4"-20 male screw threads on the top and 1/4"-20 female screw threads on the bottom for attachment to our ground stakes & spikes to increase the distance a device is located above the ground. Great for getting a solar panel or other device such as a camera away from splashing water & mud and to raise it above obstructions such as grass, plants, rocks, roots, etc. More than one extension rod can be screwed together to extend the height even further! This extension rod is weather resistant and made of a lightweight, black painted aluminum alloy material and measures 0.395” in diameter by 8.25” in length.

This 6-1/8” long, high-quality, 0.750” diameter black anodized aluminum alloy extension pole has 1/4"-20 male screw threads on the top and 1/4"-20 female screw threads on the bottom for attachment to our ground stakes & spikes to increase the distance a device is located above the ground. Large diameter provides more rigidity for heavier devices. Great for getting a solar panel or other device such as a camera away from splashing water & mud and to raise it above obstructions such as grass, plants, rocks, roots, etc. More than one extension pole can be screwed together to extend the height even further! This extension pole is not like other painted extension pole and is made of high-quality 6061 aluminum alloy and is anodized black, so it won’t peel or chip. The 6061 aluminum alloy is hardened for toughness and is sand blasted prior to anodization for a super smooth and consistent finish. Weather, corrosion & rust resistant.

This swivel head mount has 1/4"-20 male screw threads on the top swivel assembly for attachment to our solar panels that have 1/4"-20 female screw thread sockets on the back. The swivel head mount can then be attached to our tree mounts, ground stakes and extension poles which have 1/4"-20 male screw threads for attachment to the bottom of this swivel head mount which has a 1/4"-20 female screw thread socket. The swivel head ball can be adjusted in both azimuth and elevation. The azimuth angle can be rotated a full 360°, and the elevation angle can be adjusted up to 45° and a full 90° when the stem on the swivel head ball is positioned in the notch in the housing. These versatile adjustment options allow for positioning of the solar panel to better align with the direction of the sun. See the illustrations for more details about these positioning options and application examples. Once the position of the solar panel is determined, the adjustment knob can be firmly tightened to hold the solar panel in place. The raised textured plastic finish on the top of the round jam nut helps to prevent the solar panel from inadvertently rotating, and the round jam nut can also be firmly tightened up against the back of the solar panel to further prevent inadvertent rotation. The housing of the swivel head is made of a black anodized aluminum alloy, and the swivel ball, stem and screw threads are made of a chrome plated steel to help prevent rust & corrosion. The swivel head mount has a diameter of 1.12” (28.4mm), and its overall height is 2.06” (52.4mm). This swivel head mount can also be used with tripods, digital cameras, cell phones, camcorders, trail cameras, security cameras, camera flashes, and many other types of devices that have standard 1/4"-20 tripod screw threads.

This tree mount has 1/4"-20 male screw threads on the top rotating arm for attachment to our solar panels that have 1/4"-20 female screw thread sockets on the back. The tapered threads on the bottom rotating arm are self-tapping for easy installation onto a tree or wooden post. The elevation angle of the top rotating arm can be moved up or down to optimize exposure of the solar panel to sunlight. Once the optimum angle has been determined, the wing nut at the rotating arm joint can be tightened to prevent the solar panel from moving from the desired position. The tree mount also has a wing jam nut that can be tightened up against the back of the solar panel to prevent it from rotating. The components of this tree mount are made of a painted black steel/iron alloy to help prevent rust & corrosion. This tree mount can also be used with digital cameras, cell phones, camcorders, trail cameras, security cameras, camera flashes, and many other types of devices that have standard 1/4"-20 tripod screw threads. See the illustrations for more details and application examples. The overall length of the tree mount is 6.25” long, and the tapered self-tapping screw threads are 1.25” long.

This tree mount bracket with swivel head mount is great for mounting solar panels and other devices such as trail cameras to trees and wooden posts. The swivel head mount screws onto the tree mount bracket via standard 1/4”-20 tripod screw threads, and the top of the swivel head mount has standard 1/4”-20 male tripod screw threads for mounting solar panels, trails cameras and many other types of devices that have standard 1/4”-20 female tripod screw threads. The swivel head mount is adjustable for versatile positioning of solar panels and trail cameras. The tree mount bracket has self-tapping tapered wood screw threads for mounting to trees or wooden posts. Both the tree mount bracket and swivel head mount are made of weather and rust-resistant materials.

This wall & post mount has 1/4"-20 male screw threads on the top of a swivel ball for attachment to our solar panels that have 1/4"-20 female screw thread sockets on the back. The flange on the base of this wall & post mount can be attached to a flat surface such as a wall or post using the screws included in the mounting kit. The swivel ball assembly can be adjusted in both azimuth and elevation. The azimuth angle can be rotated a full 360°, and the elevation angle can be adjusted up to 45° and a full 90° when the stem on the swivel ball is positioned in the notch in the retaining stem. These versatile adjustment options allow for positioning of a solar panel to better align with the direction of the sun. See the illustrations for more details about these positioning options and application examples. Once the position of the solar panel is determined, the adjustment collar can be firmly tightened to hold the solar panel in place. The round base jam nut can then be firmly tightened up against the back of the solar panel to prevent the solar panel from inadvertently rotating. The flange mount, base, retaining stem and adjustment collar are made of a black painted aluminum alloy, and the round base jam nut is made of a black plastic ABS material. The swivel ball is also made of an aluminum alloy material to prevent rust & corrosion. The flange mount has a diameter of 2.25” (5.72cm), and the overall height of the wall & post mount is 4” (10.16cm). This versatile wall & post mount can also be used with trail cameras, security cameras, motion sensors, and many other types of devices that have standard 1/4"-20 tripod mount female screw threads.