This swivel head mount has 1/4"-20 male screw threads on the top swivel assembly for attachment to our solar panels that have 1/4"-20 female screw thread sockets on the back. The swivel head mount can then be attached to our tree mounts, ground stakes and extension poles which have 1/4"-20 male screw threads for attachment to the bottom of this swivel head mount which has a 1/4"-20 female screw thread socket. The swivel head ball can be adjusted in both azimuth and elevation. The azimuth angle can be rotated a full 360°, and the elevation angle can be adjusted up to 45° and a full 90° when the stem on the swivel head ball is positioned in the notch in the housing. These versatile adjustment options allow for positioning of the solar panel to better align with the direction of the sun. See the illustrations for more details about these positioning options and application examples. Once the position of the solar panel is determined, the adjustment knob can be firmly tightened to hold the solar panel in place. The raised textured plastic finish on the top of the round jam nut helps to prevent the solar panel from inadvertently rotating, and the round jam nut can also be firmly tightened up against the back of the solar panel to further prevent inadvertent rotation. The housing of the swivel head is made of a black anodized aluminum alloy, and the swivel ball, stem and screw threads are made of a chrome plated steel to help prevent rust & corrosion. The swivel head mount has a diameter of 1.12” (28.4mm), and its overall height is 2.06” (52.4mm). This swivel head mount can also be used with tripods, digital cameras, cell phones, camcorders, trail cameras, security cameras, camera flashes, and many other types of devices that have standard 1/4"-20 tripod screw threads.

This wall & post mount has 1/4"-20 male screw threads on the top of a swivel ball for attachment to our solar panels that have 1/4"-20 female screw thread sockets on the back. The flange on the base of this wall & post mount can be attached to a flat surface such as a wall or post using the screws included in the mounting kit. The swivel ball assembly can be adjusted in both azimuth and elevation. The azimuth angle can be rotated a full 360°, and the elevation angle can be adjusted up to 45° and a full 90° when the stem on the swivel ball is positioned in the notch in the retaining stem. These versatile adjustment options allow for positioning of a solar panel to better align with the direction of the sun. See the illustrations for more details about these positioning options and application examples. Once the position of the solar panel is determined, the adjustment collar can be firmly tightened to hold the solar panel in place. The round base jam nut can then be firmly tightened up against the back of the solar panel to prevent the solar panel from inadvertently rotating. The flange mount, base, retaining stem and adjustment collar are made of a black painted aluminum alloy, and the round base jam nut is made of a black plastic ABS material. The swivel ball is also made of an aluminum alloy material to prevent rust & corrosion. The flange mount has a diameter of 2.25” (5.72cm), and the overall height of the wall & post mount is 4” (10.16cm). This versatile wall & post mount can also be used with trail cameras, security cameras, motion sensors, and many other types of devices that have standard 1/4"-20 tripod mount female screw threads.