NO LONGER AVAILABLE. REPLACED WITH NEXT-GENERATION KIT: 1D-ELIMINATOR-KIT-NG.
Description
Finally, an alternative way to power your
flameless LED candles and other electronic devices that uses 1 x D battery!
This 1 x D Battery Eliminator Kit is used to replace a real D battery in
flameless LED candles and other electronic devices that use 1 x D battery. For use in electronic devices that are
heavily used or left on for extended periods of time. This 1 x D Battery
Eliminator Kit includes 1 x D Active Dummy Cell Battery and an AC to DC Wall
Power Adapter. These components easily and neatly plug into each other for a
complete "plug-and-play" battery eliminator solution! Stop
changing out dead batteries and start saving money! Stop worrying about whether
your electronic device is turned off or in the timer mode!
The D Active Dummy Cell Battery included in this kit is the same size as a regular
D battery, so it easily fits into the electronic device's battery compartment. Just
make sure you observe the correct polarity just as you would when inserting a real
battery. The thin flat flexible cable (FFC cable) coming out of the D Active
Dummy Cell Battery can easily be run around the side of most battery
compartment covers, so the original battery compartment cover can still be used.
In some cases, it might be necessary to take a small file and file out a
shallow groove in the battery compartment cover to give the FFC cable more room
to run around the side of the cover.
The AC to DC Wall Power Adapter included in this kit is designed for use with
the included 1 x D Dummy Cell Battery. The AC to DC Wall Power Adapter plugs
into a standard wall outlet and converts the 120VAC coming from the wall outlet
into 1.5VDC which is the voltage required to power electronic devices that uses
1 x D battery. Since this AC to DC Wall Power Adapter can supply up to 0.3A
of output current, it can power any electronic device on the market that uses 1
x D battery.
The D Active Dummy Cell Battery FFC cable and AC to DC Wall Power Adapter cable
can easily be hidden behind furniture, plants and under table cloths, rugs,
decorative snow, etc.
Don't forget to check out our Battery Eliminator Accessories such as Power
Extension Cables, Power Splitter Cables and additional Active Dummy Cell
Batteries.
NOTE: The D Active Dummy Cell Battery is not a real battery and will not power
an electronic device on its own. It needs to be used in conjunction with the
included AC to DC Wall Power Adapter as discussed above and depicted in the
included diagram.
NOTE: Since a regular D battery supplies 1.5VDC, a single D battery will
supply 1.5VDC. The included AC to DC Wall Adapter supplies an output voltage of
1.5VDC which is within the acceptable range required by electronic devices that
use 1 x D battery.
NOTE: The D Active Dummy Cell Battery is made
of an AA Active Dummy Cell Battery and a hollow plastic D cell battery dummy
case. The AA Active Dummy Cell Battery simply slides into the hollow plastic D
cell battery dummy case as shown in the pictures. The hollow plastic D cell
battery dummy case essentially serves as a AA to D battery size converter, so
it will properly fit in the electronic device's battery compartment.
WARNING(S): Do not attempt to charge the D Dummy Cell Battery with a battery
charger. Doing so may damage the battery charger.
IF
YOU HAVE ANY QUESTIONS OR NEED TECHNICAL SUPPORT TO DETERMINE WHICH BATTERY
ELIMINATOR KIT, REPLACEMENT PARTS OR ACCESSORIES YOU NEED, PLEASE DON'T
HESITATE TO CALL OR E-MAIL US AT [email protected].
Features
· Can Be
Used to Eliminate 1 x D Battery in Flameless LED Candles and Other Electronic
Devices That Uses 1 x D Battery
· Easy to
Use "Plug-and-Play" Kit
· Perfect
For Flameless LED Candles and Other Electronic Devices That Are Heavily Used
and Left on For Extended Periods of Time
· Kit
Includes 1 x D Active Dummy Cell Battery and a 120VAC to [email protected] Wall Power
Adapter
· Thin Flat
Flexible Cable (FFC Cable) Coming Out of Active Dummy Cell Battery Easily Runs
Around Battery Compartment Cover and Under Electronic Device Without Causing it
to Tilt or Not Sit Flat
· Power
Cables Can Easily Be Hidden Behind Furniture & Plants, Under Rugs & Tablecloths,
Around Plants & Other Objects, Under Decorative Snow, Etc.
· Works
With Our Power Eliminator Kit Accessories Such as Power Extension Cables, Power
Splitter Cables, Space Saving Slim-Line AC to DC Wall Power Adapters,
Additional Active and Passive Dummy Cell Batteries
· FFC Cable
Coming Out of Active Dummy Cell Battery Has 5.5mm x 2.1mm Barrel Socket at End
That Mates with Barrel Plug at End of AC-DC Wall Power Adapter Cable
· Blue AA
Active Dummy Cell Battery with Black FFC Cable Slides into Black AA to D
Size Converter Dummy Cell Battery Case
· Hollow
Plastic D Cell Battery Case Serve as AA to D Battery Size Converter
Specifications
Manufacturer
|
Made in China for LightsandBatteries.com,
LLC
|
Part Number
|
1D-ELIMINATOR-KIT
|
UPC Code
|
00850036828204
|
Eliminates
|
1 x D Battery
|
D Active Dummy Cell Battery
|
· Cable
Dimensions (Length x Width x Thickness): 10.83" x 0.20" x 0.00787"
(275mm x 5.08mm x 0.2mm)
· Cable
Type: Thin Flat Flexible Cable (FFC Cable)
· Wire
Gauge: 22AWG Equivalent
· Connector
Type: 5.5mm x 2.1mm Barrel Socket
· Connector
Polarity: (+) Tip/Inner Conductor, (-) Ring/Outer Conductor
· Housing
Dimensions (Length x Diameter): 2.245” x 1.25” (57.023mm x 31.75mm)
· Housing
Material: ABS Plastic
· Terminal
Material: Nickel-Plated Brass
· Colors:
Black Cable, Black Connector, Black AA to D Converter Case, Blue AA Dummy
Cell Housing
· Blue AA
Active Dummy Cell Battery Slides into Black AA to D Size Converter Dummy
Cell Battery Case
|
D Passive Dummy Cell Battery
|
NA
|
AC to DC Wall Power Adapter
|
· Input
Voltage: 100VAC-240VAC@50Hz-60Hz
· Output
Voltage: [email protected]
· Cable
Length and Type: 5-ft (1.5m) Zip Wire
· Wire
Gauge: 24AWG
· Input
Plug Type: U.S (United States) Type A Plug, 2-Pins, Unpolarized, Ungrounded
· Output
Connector Type: 5.5mm x 2.1mm Barrel Plug
· Output
Connector Polarity: (+) Tip/Inner Conductor, (-) Ring/Outer Conductor
· Housing
Size (Width x Height x Depth): 1.57" x 2.5" x 1.3" (40.0mm x 63.5mm
x 33.0mm)
· Housing
Material: ABS Plastic
· Color:
Black Cable, Black Connector, Black Housing
· Certifications:
FCC Listed
|
Location Rating
|
Indoor Use
Only
|
Accessories
|
· Active
Dummy Cell Batteries
· AC to
DC Wall Power Adapters
· Power
Extension Cables
· Power
Splitter Cables
|