D Active Dummy Cell Battery - OUTDOOR RATED (IP66) - 11" Thin Flat Flexible Cable - IP66 Rated 5.5mm x 2.1mm Barrel Socket with M12-1.75 Threads - Works with Outdoor Battery Eliminator Kits

Description

This OUTDOOR RATED (IP66) D Active Dummy Cell Battery is used to replace a real D battery in outdoor products that use one or more D batteries. It has an 11" long thin flat flexible cable (FFC cable) with an IP66 rated 5.5mm x 2.1mm female barrel socket with M12-1.75 screw threads at the end. This barrel socket will work with the IP66 rated 5.5mm x 2.1mm male barrel plugs with M12-1.75 screw threads on our Outdoor Battery Eliminator Kits and Accessories (Outdoor Power Splitter Cables, Outdoor Power Extension Cables and Rechargeable Solar Panels). A weatherproof seal is created by compression of the rubber o-ring on the mating connector (male plug) when the connectors are firmly screwed together (refer to illustrations). The connector on this cable will mate with regular (non-weatherproof) 5.5mm x 2.1mm DC barrel connectors (male plugs), but the connection will not be weatherproof (water and dirt). This Outdoor D Active Dummy Cell Battery will work by itself or in conjunction with our D Passive Dummy Cell Batteries and the appropriate power source such as our Rechargeable Solar Panels or an AC to DC Wall Power Adapter to eliminate expensive batteries that are constantly having to be replaced. Please read the detailed discussion and diagram for the components that make up a complete Outdoor Battery Eliminator solution. Stop changing out dead batteries and start saving money with our Outdoor Battery Eliminator Kits & Accessories.

This Outdoor D Active Dummy Cell Battery is one component of an overall Outdoor Battery Eliminator solution which consists of an Outdoor D Active Dummy Cell Battery (this component), our D Passive Dummy Cell Batteries (part number D-PASSIVE-DUMMY - quantity depends on the number of regular batteries required by the outdoor electronic device), and a suitable DC power source such as our rechargeable solar panels or an AC to DC Wall Power Adapter. The DC output voltage depends on the number of batteries used by the outdoor electronic device). The tip/inner conductor of the barrel socket goes to the (+) terminal of the Outdoor D Active Dummy Cell Battery, and the ring/outer conductor of the barrel socket goes to the (-) terminal of the Outdoor D Active Dummy Cell Battery. This internal connection is needed to complete the circuit necessary in the outdoor electronic device when used in conjunction with one or more D Passive Dummy Cell Batteries.

This Outdoor D Active Dummy Cell Battery is the same size as a real D battery, so it fits in one of the battery spaces in the battery compartment. It doesn't matter which space it goes into as long as the correct polarity is still observed as with regular batteries. The FFC cable can easily be run around the rubber gasket found on most waterproof outdoor battery compartment covers, so the original battery cover and rubber gasket can still be used. Since most rubber gaskets are compressible, a tight seal will be maintained between the FFC cable and the battery compartment cover, so the waterproofness of the battery compartment will still be maintained.

As an example application, suppose you want to eliminate 2 x D batteries in an outdoor electronic product such as a thermometer. You will need 1 x Outdoor D Active Dummy Cell Battery (this component), 1 x D Passive Dummy Cell Battery and a suitable DC power source such as one of our Rechargeable Solar Panels or an AC to DC Wall Power Adapter. Since each regular D battery supplies 1.5VDC, two D batteries will supply 3VDC, so you would need a DC power source that can supply a voltage around 3VDC (3.3VDC is also acceptable).

As another example application, suppose you want to eliminate 4 x D batteries in an outdoor electronic product such as a motion activated sprinkler. You will need 1 x Outdoor D Active Dummy Cell Battery (this component), 3 x D Passive Dummy Cell Batteries and a suitable DC power source such as one of our Rechargeable Solar Panels or an AC to DC Wall Power Adapter. Since each regular AA battery supplies 1.5VDC, four D batteries will supply 6VDC, so you would need a DC power source that can supply 6VDC.


NOTE(S):

· This is not a real D battery and will not power an electronic device on its own. It needs to be used in conjunction with the other necessary components that make up a complete Outdoor Battery Eliminator solution as discussed above and depicted in the included diagrams.

· This Outdoor D Active Dummy Cell Battery is made of an Outdoor AA Active Dummy Cell Battery and a hollow plastic AA to D converter case. The Outdoor AA Active Dummy Cell Battery slides into the hollow plastic AA to D converter case as shown in the pictures. The hollow plastic AA to D converter case serves as a AA to D battery size converter, so it will properly fit in battery compartments that use D batteries.

· The black plastic AA to D converter case, and the blue Outdoor AA Active Dummy Cell Battery case are not IP66 rated and are intended for use in a sealed battery compartment.

· The thin flat flexible cable (FFC cable) and the 5.5mm x 2.1mm female barrel socket with M12-1.75 screw threads are both IP66 rated and can be exposed to the outdoor elements after the FFC cable runs through the rubber gasket on most waterproof outdoor battery compartment covers.

· Please make sure the mating connector used with this Outdoor D Active Dummy Cell Battery has M12-1.75 screw threads. M12 specifies the diameter of the threads as 12mm (refer to illustrations), and 1.75 specifies the pitch of the screw threads as 1.75mm and is the distance between threads in mm (refer to illustrations). If the mating connector does not have the same thread diameter and the same thread pitch, then the screw nut on the mating connector will not work, and the rubber o-ring on the mating connector will not be properly compressed which is necessary to create a weatherproof seal. The connector on this cable will mate with regular (non-weatherproof) 5.5mm x 2.1mm DC barrel connectors (male plugs), but the connection will not be weatherproof (water and dirt).

IF YOU HAVE ANY QUESTIONS OR NEED TECHNICAL SUPPORT TO DETERMINE WHICH COMPONENTS YOU NEED, PLEASE DON"T HESITATE TO CALL OR E-MAIL US AT [email protected]

Features

· Same Size as a Real D Battery

· Can be Used in Most Outdoor Products That Have a Sealed Battery Compartment

· IP66 Outdoor Rating Resists Water, Dirt, Mud and Dust

· 11” Long Thin Flat Flexible Cable (FFC Cable) with IP66 Rated 5.5mm x 2.1mm Female Barrel Socket with M12-1.75 Screw Threads

· FFC Cable Will Fit Around Rubber Gaskets on Most Waterproof Outdoor Battery Compartment Covers

· Works With Our Rechargeable Solar Panels and Outdoor Rated Power Extension and Power Splitter Cables

· (+) Terminal is Internally Connected to Tip/Inner Conductor of Barrel Socket, and (-) Terminal is Internally Connected to Ring/Outer Conductor of Barrel Socket in Order to Complete Circuit Necessary to Supply Power to an Outdoor Electronic Device

· Blue Outdoor AA Active Dummy Cell Battery with Black Outdoor Rate FFC Cable Slides into Black AA to D Size Converter Dummy Cell Battery Case

· Hollow Black Plastic D Cell Battery Case Serves as AA to D Battery Size Converter

· Works By Itself or in Conjunction with Our D Passive Dummy Cell Batteries and the Appropriate DC Power Source Such as Our Rechargeable Solar Panels or an AC to DC Wall Power Adapter to Supply Power to an Electronic Device in Lieu of Expensive Batteries

· One Component That Forms a Complete Outdoor Battery Eliminator System

· Part of an Outdoor Battery Eliminator System That's Perfect for Many Types of Battery Powered Outdoor Electronic Devices such as Automatic & Motion Activated Sprinklers, Outdoor & Landscape Lighting, Trail & Security Cameras, Animal & Pest Deterrents, Motion and Infrared Detectors, Automatic Pet Feeders, Automatic Fish Feeders, Smart Bird Feeders, Weather Stations, Outdoor Thermometers, Water Feature Pumps, Small Pond Pumps, Seasonal Decorations, Electronic Timers, Etc.

Specifications